NF C26-220/A1-2010 固体绝缘材料的证明和比较跟踪指数的测定方法

作者:标准资料网时间:2024-05-03 23:55:14 浏览:8381 来源:标准资料网

【英文标准名称】:Methodforthedeterminationoftheproofandthecomparativetrackingindicesofsolidinsulatingmaterials.
【原文标准名称】:固体绝缘材料的证明和比较跟踪指数的测定方法
【标准号】:NFC26-220/A1-2010
【标准状态】:现行
【国别】:法国
【发布日期】:2010-05-01
【实施或试行日期】:2010-05-21
【发布单位】:法国标准化协会(FR-AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:加速度试验;漏电距离;定义;测定;电气工程;电绝缘材料;索引;目录;绝缘材料;绝缘件;泄漏电流;漏电路径;材料;试验;跟踪系数
【英文主题词】:Acceleratedtesting;Creepagedistances;Definitions;Determination;Electricalengineering;Electricalinsulatingmaterials;Indexes;Indices;Insulatingmaterials;Insulations;Leakagecurrents;Leakagepaths;Materials;Testing;Trackingindex
【摘要】:
【中国标准分类号】:K15
【国际标准分类号】:29_035_01
【页数】:7P;A4
【正文语种】:其他

下载地址: 点击此处下载

返回跳至顶部

上一篇: NF C64-200-1-2010 高压熔断器.第1部分:限流熔断器
下一篇: NF L52-310-014-2010 航空航天系列.一般用途的单芯和多芯电缆.工作温度为-55℃～260℃.第014部分:DR族5至10芯压胶的可激光打印屏蔽和置于壳内的电缆.产品标准

Product Code:SAE AMS3337
Title:Silicone (PVMQ) Rubber, Extreme-Low-Temperature Resistant, 65-75
Issuing Committee:Ams Ce Elastomers Committee
Scope:This specification covers a silicone (PVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. Primarily for parts required to operate or seal from -85 to +230 degrees C (-121 to +446 degrees F), compounded especially for operation at extreme low temperatures. Silicone rubber is resistant to deterioration by weathering and by high-aniline-point petroleum-base oils and remains flexible over the temperature range noted. These products are not normally suitable for use in contact with low-aniline-point petroleum-base fluids, including fuels, due to excessive swelling.Product Code:SAE J1013
Title:Measurement of Whole Body Vibration of the Seated Operator of Off-Highway Work Machines
Issuing Committee:Hftc4, Operator Seating And Ride
Scope:This SAE Standard defines a method for the measurement of the whole body vibration to which the seated operator of off-highway self-propelled work machines is exposed while performing an actual or simulated operation. It applies to vibration transmitted to the operator through the seat. There are not equivalent ISO Standards. In the main body of this document, conditions are defined for measuring and recording whole body vibration of the seated operator of off-highway self-propelled work machines. The specification of instruments, analytic methods, and description of site and operating conditions allows the measurements to be made and reported with an acceptable precision. The procedure includes means of weighing the vibration level at different frequencies as specified in ISO2631. A standard format for reporting spectral data is recommended. The definitions, instruments, and analytic methods also apply to simulated tests for operator vibration as performed in laboratories. This procedure is a measuring method only and is not intended for the evaluation or selection of seating systems.