ANSI/SCTE 95-2009 HMS内置设备HMTS操作原理

上一篇: ANSI/SCTE 79-2-2009 DOCS2.0.第2部分:操作支持系统接口
下一篇: ANSI/SCTE 83-4-2009 HMS通用内部通信装置管理信息库(MIB)SCTE-HMS-HE-RF-MIB

Product Code:SAE J2832
Title:Welded Flash Controlled, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Double Flaring
Issuing Committee:Metallic Tubing Committee
Scope:This SAE Standard covers stress relieved electric resistance welded flash controlled single wall high strength low alloy steel tubing intended for use in high pressure hydraulic lines and in other applications requiring tubing of a quality suitable for bending, double flaring and cold forming. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path that would be caused by the ID weld bead. The grade of material produced to this specification is of micro-alloy content and is considerably stronger and intended to service higher pressure applications using thinner walls than like sizes of the grades of material specified in SAE J356, SAE J2435 and SAE J2613. Due to the alloy content of the material, the forming characteristics of the finished tube are equal to or better, when compared to SAE J356, SAE J2435 and SAE J2613. Nominal reference working pressures for this tubing are listed in SAE J1065.Caution: When brazing or welding is used as a tube end joining method, the structural integrity of the tube material can potentially be compromised due to the degradation of the areas affected by the thermal effect applied to the tubing; therefore, the SAE J1065 nominal reference working pressures may not be applicable.Brazed and/or welded tube assembly configurations made to specific geometry and components bill of material in association with this material, may require qualification testing in accordance with SAE J2658 Metallic Tube Conductor Assemblies for Fluid Power and General Use?Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies. Cold forming the tube end configurations avoids this systemic testing by not compromising the tube material structural integrity.【英文标准名称】:Specificationforhardwatertobeusedfortestingtheperformanceofsomehouseholdelectricalappliances
【原文标准名称】:某些家用电器性能试验用的硬水规范
【标准号】:BSEN60734-1993
【标准状态】:作废
【国别】:英国
【发布日期】:1993-07-15
【实施或试行日期】:1993-07-15
【发布单位】:英国标准学会(BSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:试验条件;标准溶液;水;化学成分;家用电器;性能试验;家用设备;换算(计量单位);实验室试验;硬水;储存
【英文主题词】:
【摘要】:
【中国标准分类号】:Y60
【国际标准分类号】:97_040_50
【页数】:16P;A4
【正文语种】:英语